2wdMod.com

Menu

Skip to content
  • Home
  • News
  • AE B5
  • Kyosho RB6
  • TLR 22
  • YZ-2
  • Misc
  • Contact

Category Archives: Kyosho RB6

Schelle RB6 Steering Rack – Closer Look
Kyosho RB6

Schelle RB6 Steering Rack – Closer Look

Posted on August 9, 2014 by 2wdMod • 1 Comment

If you haven’t read my PREview of the Schelle rack, I’d recommend reading that 1st to give you a basic description of what this product is and my 1st impressions. In continuation, I wanted to take a closer look of the “optional” wider setting on the Schelle rack and report to you my findings. Unfortunately, Portland is … Continue reading →

PREview: Schelle Steering Rack for Kyosho’s RB6/RT6/SC6
Kyosho RB6

PREview: Schelle Steering Rack for Kyosho’s RB6/RT6/SC6

Posted on June 25, 2014 by 2wdMod • 1 Comment

There seems to be some serious hotness to steering racks in the world of RC racing right now. For instance, we have TLR going to a bell crank system instead of it’s original slider design on the 1.0 and 2.0 cars. You can now purchase aluminum upgrades by all the major RC manufacturers like Kyosho’s gunmetal … Continue reading →

RB6 Loose Track Setup for Mid-Motor
Kyosho RB6

RB6 Loose Track Setup for Mid-Motor

Posted on June 9, 2014 by 2wdMod • Leave a comment

Do you run on a loose outdoor, loamy track? I know what you’re thinking…. Rear motor time b/c mid motor on a loose, loamy, dusty track mid motor is going to be a nightmare. In our heads we have been told…. 1.) Rear motor for loose tracks, mid motor for high bite. 2.) Plastic chassis is better … Continue reading →

Schelle Releases RB6 Steering Rack and Protector!
Kyosho RB6

Schelle Releases RB6 Steering Rack and Protector!

Posted on May 23, 2014 by 2wdMod • Leave a comment

  Schelle is up and running and dropping kick ass hop-ups in full force. Without a doubt, the highly innovative “Coach” has been hard at work and now has a unique upgrade for all Kyosho 6 series cars. Not only including bearings to eliminate slop in the stock bushing setup, Schelle also adds a new feature … Continue reading →

Tebo’s 2wd REEDY 2014 Setup
Kyosho RB6

Tebo’s 2wd REEDY 2014 Setup

Posted on January 31, 2014 by 2wdMod • 1 Comment

So I finally got a chance to take a look at Jared’s 2wd from the Reedy Race and to my surprise, it’s completely different from the way he normally runs his RB6. I gotta say I do like the yellow in his new paint scheme and the yellow wheels as it gives it a bit … Continue reading →

2wd Close Up – Andy DiBrino’s PNW Winning Setup
Kyosho RB6

2wd Close Up – Andy DiBrino’s PNW Winning Setup

Posted on November 14, 2013 by 2wdMod • 1 Comment

I got a chance to catch up with last weekend’s TQ and winner of the Pacific Northwest Showdown, Andy DiBrino. He was kind enough to share with me his race winning ride and of course……to share the news with all of you. I’ve been wanting to tour around and do this for quite sometime now … Continue reading →

Jared Tebo’s Winning 2wd @ IFMAR WORLDS 2013
Kyosho RB6 / News

Jared Tebo’s Winning 2wd @ IFMAR WORLDS 2013

Posted on September 30, 2013 by 2wdMod • Leave a comment

These photos are brought to you by the wonderful guys at NeoBuggy. Without their hard work and appearance at the World Championships, we would be without these little delights and the world would be a “sadd’er” place. Oooh, how bad was that?! Anyways, visit their site. I do not take credit for their work and … Continue reading →

Kyosho’s Jared Tebo Wins 2wd WORLDS!!!!
Kyosho RB6 / News

Kyosho’s Jared Tebo Wins 2wd WORLDS!!!!

Posted on September 26, 2013 by 2wdMod • Leave a comment

A2!!!!!!!! What an unbelievable race! If you haven’t seen it you gotta watch Jared fight for the title of WORLD CHAMPION!!! It’s been over 26 years since Kyosho won a 2wd title so congrats to them and Jared Tebo for an accomplishment that will last a lifetime! Only a few are able to achieve this … Continue reading →

JConcepts RB6/RT6 Aluminum Steering Bell-Cranks
Kyosho RB6

JConcepts RB6/RT6 Aluminum Steering Bell-Cranks

Posted on September 11, 2013 by 2wdMod • Leave a comment

More performance? Quicker, more reliable steering? Affordable price? Now you can have it all with JConcepts’ new aluminum steering bellcranks for your RB6 and RT6 (soon?). I remember back in the day when everyone ran servo savers or plastic servo horns, plastic steering racks, plastic bellcranks etc…. was all because racers wanted to protect the … Continue reading →

JConcepts Honeycomb Motor Plate
AE B4.2 / Kyosho RB6 / News / TLR 22

JConcepts Honeycomb Motor Plate

Posted on September 5, 2013 by 2wdMod • Leave a comment

JConcepts brings a new motor plate for the RB6, B4.2, and TLR’s 22 (also works with the truck variant as well). It has special kind of milling that is suppose to be stronger than the original factory motor plates. In the past, traditional lightened motor plates usually have long CNC work done to them, however … Continue reading →

Post navigation

← Older posts

Recent Posts

  • 2nd Annual Lunsford Race 2016
  • 2wdMod Reviews: Yokomo YZ-2! Part 1 – The Build
  • 2015 3rd Annual South Valley Invert
  • 2015 1st Annual NW Astro Invitationals @ NW Hobbies – The Astro Experience!
  • IFMAR World’s 4wd photo epic

Archives

Enter your email address to follow this blog and receive notifications of new posts by email.

Join 69 other subscribers
Blog at WordPress.com.
Privacy & Cookies: This site uses cookies. By continuing to use this website, you agree to their use.
To find out more, including how to control cookies, see here: Cookie Policy
  • Subscribe Subscribed
    • 2wdMod.com
    • Join 69 other subscribers
    • Already have a WordPress.com account? Log in now.
    • 2wdMod.com
    • Subscribe Subscribed
    • Sign up
    • Log in
    • Report this content
    • View site in Reader
    • Manage subscriptions
    • Collapse this bar
 

Loading Comments...